Graphite Crucible Solutions for Precious Metal Recovery and Refining
description1
description2
Properties of Graphite Crucibles
1. Thermal Conductivity
Graphite crucibles have high thermal conductivity, enabling rapid and uniform heat transfer to the metal charge.
2. Thermal Shock Resistance
They exhibit excellent resistance to thermal shock, so they can withstand sudden heating and cooling without cracking.
3. Chemical Inertness
Graphite is chemically inert and does not react with most molten metals, slags, or fluxes, preventing contamination.
4. High-Temperature Strength
The crucible maintains mechanical strength even at extreme temperatures above 2000°C under protective atmospheres.
5. Oxidation Resistance
In air, oxidation begins above 500°C, but with coatings or inert gas, it can be effectively suppressed for longer life.
5. Smooth Inner Surface
The smooth inner surface reduces metal adhesion, facilitates pouring, and simplifies cleaning between melts.
Standard Gold Melting Crucible Dimensions
|
Weight |
External Diameter |
Inner Diameter |
Bottom Diameter |
Height |
|
|
1KG graphite crucible |
160g |
58mm |
35mm |
47mm |
88mm |
|
1KG quartz sleeve |
160g |
69mm |
50mm |
58mm |
87mm |
|
2KG graphite crucible |
240g |
65mm |
44mm |
57mm |
118mm |
|
2KG quartz sleeve |
265g |
81mm |
61mm |
70mm |
110mm |
|
3KG graphite crucible |
390g |
85mm |
60mm |
75mm |
105mm |
|
3KG quartz sleeve |
324g |
97mm |
79mm |
88mm |
104mm |
|
5KG graphite crucible |
640g |
100mm |
69mm |
88mm |
131mm |
|
5KG quartz sleeve |
693g |
119mm |
90mm |
100mm |
135mm |
Customized
|
Custom Dimensions |
|
|
SIZE |
Outer diameter, inner diameter, height, wall thickness |
|
SAHPE |
Round, rectangular (sagger), special shapes |
|
MATERIAL |
Natural graphite / Synthetic graphite / High-purity grade |
|
PURITY/ASH |
Ash content from standard grade to <20ppm |
|
DENSITY |
Bulk density adjustable (typically 1.6–1.95 g/cm³) |
|
Antioxidant Treatment |
Anti-oxidation coating or impregnation available |
|
Included Accessories |
Lids, skimming spoons, pouring spouts, stirrers, etc. |





Precautions & Operating Instructions
1.Store in Dry Place: Keep on wooden pallets; avoid cement floors or damp areas.
2.Preheating Before First Use
1)Mandatory Baking: New crucibles, or those reused after long-term storage, must be slowly baked to remove all moisture before the first use.
2)Low-Temperature Stage: Hold at 200°C - 300°C for 1-2 hours.
3)Ramping Stage: Slowly heat up to 500°C - 600°C and hold for 1 hour until no more smoke or steam is emitted. Note: Never rapidly heat a new crucible or place it directly into a hot furnace. Rapid expansion of moisture can cause the crucible to crack or explode.
3.Charge Gently: Do not tamp down materials or apply strong impact.
4.Avoid Direct Flame: In gas furnaces, prevent flame from impinging directly on the crucible wall.
5.Empty While Hot: Pour out molten metal promptly to prevent solidification from cracking the crucible.
6.Remove Slag Gently: Tap lightly to remove residue; never pry with metal tools.
Quality Commitment:



