Leave Your Message

Graphite Electrodes Engineered for Longer Lifespan and Lower Consumption.

Product Name:Graphite Electrode

Grade: RP & HD & HP & UHP

Diameter Range:φ250-700

Country Of Origin: China

Graphite electrodes are essential conductive materials widely used in Electric Arc Furnace (EAF) and Ladle Refining Furnace (LRF) steelmaking. Manufactured from high-quality needle coke and petroleum coke, our graphite electrodes undergo a rigorous production process, including extrusion, baking, impregnation, and graphitization at over 2,800°C. This ensures excellent electrical conductivity, superior thermal shock resistance, and high mechanical strength under extreme operating conditions.


    Technical indicator​
    Technical indicators
    项目
    Item
    单位
    Unit
    普通功率RP 普通高密功率HD 高功率HP 超高功率UHP
    ①250-400 φ450-600 φ250-400 ①450-600 ①250-400 φ450-600 ①300-400 ①450-500 φ550-650 Φ700-800
    电阻率(不大于)
    Resistivity
    Max
    电 极
    Electrode
    μΩm 9.0 9.0 7.0 7.0 6.5 6.5 6.2 6.2 6.0 5.8
    接 头
    Nipple
    8.0 8.0 6.3 6.3 5.5 5.5 5.0 5.0 4.2 4.0
    抗折强度(不小于)
    Flexural Strength
    Min
    电 极
    Electrode
    Mpa 8.0 7.0 10.0 9.0 10.5 10.0 10.5 10.5 11.0 11.0
    接 头
    Nipple
    15.0 15.0 17.0 17.0 18.0 19.0 20.0 20.0 22.0 23.0
    弹性模量(不大于)
    Elastic Modulus Max
    电 极
    Electrode
    Gpa 9.3 9.3 12.0 12.0 14.0 14.0 14.0 14.0 14.0 14.0
    接 头
    Nipple
    14.0 14.0 16.0 16.0 16.0 16.0 20.0 20.0 22.0 22.0
    体积密度(不小于)
    Bulk Density
    Min
    电极
    Electrode
    g/cm³ 1.54 1.54 1.64 1.64 1.65 1.65 1.67 1.66 1.66 1.68
    接 头
    Nipple
    1.72 1.72 1.74 1.74 1.74 1.74 1.75 1.76 1.78 1.78
    热膨胀系数(不大于)
    C.T. E
    (100-600℃)Max
    电极
    Electrode
    10-6/℃ 2.9 2.9 2.6 2.6 2.4 2.4 1.5 1.5 1.5 1.5
    接 头
    Nipple
    2.7 2.7 2.3 2.3 2.0 2.0 1.4 1.4 1.3 1.3
    灰分(不大于)
    Ash Max

    电极
    Electrode

    接 头
    Nipple

    % 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
    Physical and chemical indicators of graphite electrodes
    公称直径
    Nominal Diameter
    允许电流负荷(A)
    Permissible Current Load
    mm 普通功率RP 普通高密功率HD 高功率HP 超高功率UHP
    250 7000-10000 8000-12000 8000-13000 一
    300 10000-13000 11000-16000 13000-17400 15000-22000
    350 13500-18000 15000-22000 17400-24000 20000-30000
    400 18000-23500 20000-28000 21000-31000 25000-40000
    450 22000-27000 24000-34000 25000-40000 32000-45000
    500 25000-32000 28000-42000 30000-48000 38000-55000
    550 28000-34000 31000-48000 34000-53000 45000-65000
    600 30000-36000 34000-54000 38000-58000 50000-75000
    650 32000-39000 41000-65000 60000-85000
    700 34000-42000 45000-72000 70000-120000
    Diagram showing the various parts of a graphite electrode
    d26b1ebb964ceb930f7056e4fabdc837.png
    941a1230811b335dda925025cb996585(1).png
    Graphite electrode diagram 3
    Graphite electrode diagram 4
    Preparation Process
    Preparation Process
    Quality Control

    We implement a strict and comprehensive quality control system throughout the entire production process – from raw material selection to final shipment.

    Solid raw material testing
    Moisture Content
    ASH
    Volatile Matter
    Sulphur Content
    True Specific Gravity
    Powder resistivity
    Fixed Carbon
    Particle Strength
    Particle Size Distribution
    Thermal Expansion Coeffcient
    Scope of liquid raw material testing
    Moisture content
    Ash content
    Volatile matter
    Softening point
    Coking value
    Sulphur content
    Toluene insolubles
    Quinoline insoluble substance
    Product testing
    Resistivity
    Bulk density
    True specific gravity
    Elastic modulus
    Flexural Strength
    Compressive strength
    Thermal expansion coefficient
    Storage & Connection Precautions
    01

    Please do not stack the electrodes and connectors directly on the ground. They should be placed on wooden or iron frames to avoid electrode damage or sticking to soil. For electrodes that are not in use temporarily, do not throw away the packaging to prevent dust and debris from falling onto the threads or electrode threaded holes.

    02

    Graphite electrodes should be stored neatly in the warehouse, and both sides of the electrode stack should be leveled to prevent slipping. The stacking height of electrodes should generally not exceed 2 meters, and it is best not to exceed 4 layers.

    03

    The stored graphite electrodes should be protected from rain and moisture. If there are damp electrodes, they should be dried before use to avoid cracking, falling off, and increasing oxidation consumption during steelmaking.

    04

    Do not store the electrode nipple near high temperatures to prevent the nipple bolt from melting due to excessive temperature

    Other usage precautions
    01

    When loading electric furnace materials into the furnace, in order to reduce the impact of material collapse and falling on the electrodes, large blocks of material should be placed in the middle near the bottom of the furnace. At the same time, attention should be paid not to allow non-conductive objects such as lime to accumulate in large quantities directly below the electrode, affecting the electrification effect or damaging the electrode

    02

    Attention should be paid to the position of the furnace cover. The furnace cover is skewed, and when the electrodes rise or fall, they will rub against the furnace cover, causing electrode damage and scraping

    03

    Electrodes should be used vertically to avoid tilting operations

    04

    Avoid using electrodes to add carbon to the molten steel to prevent electrode performance degradation

    05

    The sealing of the furnace cover should be good to reduce the amount of air entering, and appropriate use of combustion nozzles and oxygen should be made to reduce oxidation consumption at high temperatures

    06

    For electric furnaces with high vibration, the method of using pins can also be used to prevent loosening and trip

    07

    There are two types of tapered threads: one inch three buckles and one inch four buckles. When using, attention should be paid to the number of thread teeth on the lifting tool, and the number of thread teeth on the joint should match the number of thread teeth on the electrode hole

    08

    Due to the differences in raw materials and manufacturing processes used by various manufacturers, there are certain differences in the physical and chemical properties of electrodes and nipples. Therefore, in general, it is not allowed to exchange nipples and electrodes produced by different manufacturers for use

    09

    When connecting electrodes, if loose nipple bolts are found, they must be replaced or supplemented before connection and use

    10

    After electrode connection, if any gaps are found, the cause must be identified and eliminated before use

    Packing & DELIVERY
    微信图片_20230324150727.jpg
    微信图片_20230324150705.jpg
    9c3b01902c50a14de5ee35f720ab644f(1).jpg
    d9e4388e801e83dc56fc4e23a819bba2(1).jpg
    378ab8fda3560023dbe0fa55eb21a188(1).jpg
    04fcf90d0174d75a817ef6ba888d5daa(1).jpg